|
|
|
Quality Shed Plans!
Our customers have built thousands of sheds from our plans. All of our shed plans have easy to follow instructions and full size patterns for roof rafters. Our plans inlcude a complete materials list. Each set of plans comes with a FREE set of rough window and door framing plans. |
All shed plans are $15.00 each. Porch plans are $4.95 each. |
|
| Then do the same on the other end with the second end roof rafter. |
|
|
| Place your ridge beam in place and put your end braces under your end roof rafters. When I do the roof rafters, I do two on each side at a time. This is to ensure I do not force a bow in the ridge beam or to straighten any bow that might be in it already. |
|
|
| Put the siding on your gable ends. I do this before I put the look-outs in place. This way, I don't have to make the cuts around the 2"x4" lookouts. Add the width of your sliding to the bottom look-out so they will all end up the same length. |
|
|
| To put the look-outs in place, I use one thin nail to hold them and free up my hands. Then I use a couple of wood or deck screws. Don't worry if at this time, your lookouts are not tight. |
|
|
| Next, add your trim board to the tail ends of the roof rafters. The bottom edge of your trim board will be flush with the bottom edge of your tail rafter. Place the trim board down the look outs. Let the trim boards overlap and use one as a guide to saw the other one. This will ensure a perfect cut and clean look at your corners. |
|
|
| All the siding is in place. The roof rafters and the look-outs for this side. |
|
|
|
|
